Description
Elegoo 3D printer resin is compatible with most LCD 3D printers on the market that use a wavelength of 405nm. It is specially designed for LCD/LED light sources for maximum print quality.
If you use Elegoo's resin 3D printer, their software profiles are based on their own resin.
Recommended 3D printing settings: (For Mars printer)
- Bottom exposure layer: 60s
-
Normal Exposure: 8S
Resin Parameters:
| Hardness |
84D; Shrinkage rate 7.1%
|
|
Viscosity 25°C
|
150-200 mPa·s |
| Liquid density |
1,100 g/cm³ |
| Solidified density: |
1.195 g/cm³ |
| Flexure Strength
|
59-70Mpa |
| Extension Strength:
|
36-53Mpa |
| Recommended notice period: |
Should be consumed within 2 years |
NOTE: When using resin, keep the following in mind:
- Shake well before use.
- Recommended temperature is 20°C - 25°C
- Avoid UV Light, dust
- Always wear protective gloves and a breathing mask.
- Use in a well-ventilated area.
