Description
Elegoo 3D printer resin is compatible with most LCD 3D printers on the market that use a wavelength of 405nm. It is specially designed for LCD/LED light sources for maximum print quality.
Elegoo's water washable resin can be washed in tap water instead of isopropyl alcohol. This simplifies the post-processing of your prints and you avoid strong and flammable substances.
If you use Elegoo's resin 3D printer, their software profiles are based on their own resin.

Recommended 3D printing settings: (For Mars printer)
- Bottom exposure layer: 60s
-
Normal Exposure: 8S
Resin Parameters:
Hardness |
80-85D
|
Viscosity 25°C
|
100-350 mPa·s |
Liquid density |
1.05-1.25 g/cm³ |
Solidified density: |
1.05-1.25 g/cm³ |
Flexure Strength
|
40-70Mpa |
Extension Strength:
|
30-52Mpa |
Recommended notice period: |
Should be consumed within 2 years |
NOTE: When using resin, keep the following in mind:
- Shake well before use.
- Recommended temperature is 20°C - 25°C
- Avoid UV Light, dust
- Always wear protective gloves and a breathing mask.
- Use in a well-ventilated area.